Adult Disposable Coverall Suit

Reliable Protection   | Comfortable Fit-Easy to Wear  | Fully Customizable

This disposable coverall suit features a one‑piece design with an integrated hood. Manufactured from high‑quality composite nonwoven fabric, it offers an optimal balance of barrier protection and breathability. It is suitable for industrial dust protection, laboratory work, food processing, cleaning operations, outdoor inspection, and other scenarios where reliable shielding from particles and light liquid splashes is required. Available in sizes S–4XL to fit a wide range of body types. Each suit is individually packaged for convenient storage and immediate use. 

Key Features

We offer FULL Customization from raw materials to finished packaging. All specifications below can be tailored to your brand requirements.

1. Full‑body protection – integrated hood and elasticised openings ensure complete coverage from head to ankle.

2. Double seal – zipper plus adhesive flap for easy access and a secure closure.

3. Comfortable wear – elastic waist and breathable fabric offer a comfortable fit without compromising mobility.

4. Individually packaged – each suit is sealed in a separate polybag, ready for immediate use and easy to carry.

5. Wide size range – available from S to 4XL, accommodating various body shapes.

6. Customisation options – material, colour, size, logo printing, and packaging can all be tailored to your needs.

Material Composition

• Water‑resistant & dust‑proof – effectively blocks water‑based liquids, dust, and fine particulates.

• Breathable – ensures air permeability to reduce stuffiness during extended wear.

• Anti‑static – treated to prevent static build‑up, suitable for electronics and similar environments.

• Tear‑resistant & durable – strong fabric resists tearing and abrasion during normal use.

• Liquid barrier – hydrostatic pressure ≥1.67 kPa at critical areas; moisture vapour transmission rate ≥2500 g/(m²·24h).

• High particle filtration – provides a reliable barrier against dust, aerosols, and airborne particulates.

The suit is made primarily from composite nonwoven fabrics. Common material options include:

The fabric is lightweight, soft, lint‑free, and non‑sticky, offering good barrier properties while maintaining breathability. Custom materials and weights can be arranged according to customer requirements.

Applicable Scenarios

• Industrial workplaces – electronics cleanrooms, machinery workshops, and environments with dust or minor liquid splashes.

• Laboratories – routine protection in research labs and testing facilities.

• Food processing – hygiene protection in food production lines and catering kitchens.

• Cleaning services – during property cleaning, sanitisation, or waste handling.

• Outdoor tasks – construction, renovation, agricultural work, and other dusty operations.

• Public protection – temporary screening at transport hubs, schools, community entrances, and similar checkpoints.

• Emergency preparedness – for traffic control, security patrols, and special environment access.

Instructions for Use

Putting On

1. Check the packaging is intact and inspect the suit for any damage or defects.

2. Open the package and unzip the suit fully.

3. Put on from the bottom up: step into the legs first, then pull the upper part over your shoulders and insert arms into the sleeves.

4. Place the hood over your head and adjust it to fit snugly around your face.

5. Zip up the front securely, then fold the flap over the zipper and press firmly to seal.

Taking Off

1. Unzip the front.

2. Pull the hood backwards and upwards to free your head, then remove the sleeves.

3. Roll the suit from top to bottom, keeping the contaminated outside surface folded inward.

4. Place the rolled suit into a designated waste bag for proper disposal.

Precautions

• Single use only – do not reuse or wash.

• Pre‑use inspection – always check for tears or damage before wearing; do not use if compromised.

• Proper fit – ensure zipper is fully closed, flap is sealed, and cuffs/ankles are snug.

• Avoid hazards – keep away from sharp objects, hot surfaces, and corrosive chemicals.

• Correct doffing – follow the rolling procedure to avoid contact with the outside surface and prevent secondary contamination.

• Storage – store in a cool, dry, ventilated place, away from fire sources and direct sunlight.

Branding & Support Services

Quality & Compliance

Certifications

Operational Metrics

FAQ

Q: Can you print my own logo and design on the single-wrap?
Absolutely. We support 1–8 color gravure printing with custom artwork, including spot colors and gradients.

Q: What's the minimum quantity for custom packaging printing?
While we recommend 100,000 pieces for optimal gravure printing cost efficiency, we welcome discussions on small-batch trials for first-time partners. Our overall MOQ is flexible at 2,000 PCS.

Q: Can I mix different sizes in one pack?
Yes. We offer combo and mixed-spec packaging, perfect for gift sets and e-commerce subscription boxes.

Q: Are biodegradable materials available?
Yes. PLA bio-based film is available for single-wrap, compliant with EN13432 for EU markets.

Q: What certifications can you provide?
We provide GB/T 8939, GB 15979, SGS/Intertek reports, MSDS, and formaldehyde/fluorescent-free declarations. CE, FDA, and ISO 13485 are available upon request.

Q: How long does sample delivery take?
Samples are ready within 3–7 working days after we receive your specifications.

Q: What if the product has quality issues?
We guarantee full refund or replacement for any confirmed quality defects.

Q: Do you accept small trial orders?
Yes. With a flexible MOQ of just 2,000 PCS, we are happy to support trial runs and custom specifications to meet your market testing needs.

Why Choose Us?

• Full customization — from top sheet to packaging, every detail can be tailored to your brand

• Premium materials — imported SAP, biodegradable options, skin-safe components

• Flexible MOQ — low barrier to entry at 2,000 PCS; welcoming both trial orders and large-volume production

• Certified quality — backed by international testing and compliance standards

• End-to-end service — design, tooling, production, and branding support under one roof